TS EN 12810-1 & TS EN 12811

TS EN 12810-1 & TS EN 12811

These are the standards of Safety Scaffolding Systems. It is available in our company.

-TS EN 12810-1 Facade scaffoldings consisting of pre-built components - Part 1: Product properties
-TS EN 12810-2 Facade scaffoldings made of pre-built components - Part 2: Special structural design methods

-TS EN 12811-1 Temporary work equipment - Part 1: Work scaffolding - Performance requirements and general design
-TS EN 12811-2 Temporary work equipment - Part 2: Material information
-TS EN 12811-3 Temporary work equipment - Part 3: Loading tests

Note : Turkish Standards Institute evaluates the above-mentioned standards under a single standard and makes certification only accordingly. This document is TS EN 12810-1. In other words, you only need to see the TSE TS EN 12810-1 document.

short designation
The designation of a scaffolding system should include the following parts in accordance with this standard.

The certificate of our company was obtained as follows.

For Flanged Type; TS EN 12810 - 4D - SW 06/300 - H2 - A/B - LS
For Type H; TS EN 12810 - 4D - SW 06/250 - H2 - A/B - LS

In order for the aforementioned product certification to be carried out by TSE, all of the following processes must be carried out in accordance with the standards specified by the manufacturer.
 

material tests
Configuration - Static evaluation
carrier elements
Platforms
Resources ( EN ISO 3834-3)
anchor
Configuration overlay (Safety nets etc.)
Coating (Galvanized)
Manual